SKU: No.01752-v2-75

Potential ver.2 2way backpack

Sale price¥39,600

(税込) Shipping calculated at checkout


The main body material is a certified factory that meets Cordura® Brand Fabric production and quality standards, with two twisted six 6 nylon threads, two twisted sides, A good original fabric, MasterTex-07. The surface of the fabric is water repellent, and the back surface is laminated the special moisture-permeable waterproof film L-Vent®, and has a waterproof function of 20,000 mm level with a 3-layer structure with a tricot nylon. Accessories and leather use a waterproof leather, and the material on the bottom is p. V. C processed on the back of 1680d nylon, so it is a specification that takes into account water resistance. Some of the shoulder harness cushions used the temperature control material outlost® developed for NASA, and the mesh material also adopted more detailed feelings than those conventionally used. The design point of the series design point, the design has been sharply, and the design of the material and storage has been updated.
Size W290 H440 D130(mm)
Weight About 1080g

MasterteX-07 (Cordura Ballistic® 420D Fabric Nylon 100% Auditable waterproof film L-vent® laminates) / Waterproof leather / 1680d Nylon back P.V.C processing


Please note that it is not completely waterproof, so it cannot prevent water from entering from the needle hole, which is the sewing part. If you leave the nylon material for a long time while wet, the film on the back will be peeled off or may deteriorate, so be sure to dry it before storing. Water -repellent processing will be the surface processing, so if you use it, the effect will be diminished due to friction. In addition, the water repellency is lost due to dust and other dirt attached to the fabric. After use, it is recommended that you remove dirt by brushing moderately and use commercially available water -repellent sprays frequently. * Please use the water -repellent spray that matches the material. When using it, read the notes carefully and then try it in an inconspicuous part.


Main storage that is fully opened so that the contents are easy to see.

On the other side is a mesh zipper pocket.

Laptops can be stored in the side zipper pocket.

The front has a zipper pocket. Convenient for storage of small items.

There is also a zipper pocket on the back side.

The shoulder belt for the backpack can be stored in the pocket on the back of the bag.

If you open the side zipper on the back left and right, it is possible to pass through the carry bar.

A chest belt that can be attached and detached to fix the left and right to the shoulder strap.

Master-Piece original CORDURA®BRAND FABRIC White name specially made by Invista.

Outlast is used for the part that hits the body of the waist and back. This is a micro capsule with paraffin wax coated with Outlast at a coating factory designated by Outlast for NASA absorbs excess heat from the body and releases the accumulated heat when the temperature is low. Because of the work, it has a function to maintain a comfortable temperature (31 ° C ~ 33 ° C).

Metal hooked crowns and D crowns are a common detail in the series.

The front part has an embossed leather name.